Lakeshore Lubricants, Inc.
              

Meters

EM-5 FLOW METER
TECHNICAL DATA
Flow range*                                         0.26 to 5 gpm    (1 to 18.9 lpm)

Operating Pressure Range
Gear Lube Units                                   32 to 1000 psi    (0.2 to 7 MPa, 2.2 to 69 bar)

Motor Oil Units                                     45 to 1000 psi    (0.29 to 7 MPa, 2.9 to 69 bar)

Weight                                                2.5 lb (1.14 kg)
Units of measurement                          factory-set in quarts
                                                          Maximum totalizer amount=99,999 units
                                                          Maximum recorded dispensed volume=999.99 units
                                                          Maximum predetermined volume=99.99 units

Inlet                                                    1/2 npt

Outlet                                                  3/8 npt

Operating temperature range                32º F to 120º F    (0º C to 49º C)

Storage temperature range                    -30º F to 120º F    (-34º C to 49º C)

Battery**                                            standard 9 volt alkaline

Expected battery life in typical shop        1 year

Wetted parts                                        zinc, stainless steel #304, LCP, carbon steel, polyurethane, nitile rubber

Fluid compatibility                                lubricating oils, antifreeze mixtures

Meter valve assembly pressure loss
at 1.5 gpm (5.7 lpm) with 30-weight oil at 70ºF (21ºC)        17 psi (0.12 MPa, 1.2 bar)

Accuracy†                                            +/- 0.5 percent

Repeatability‡                                      +/- 0.15 percent

Default settings for calibration factor
10W 30 oil                                            368

antifreeze                                             390

* Tested in No. 10 motor oil. Flow rates vary with fluid pressure and viscosity.
** Battery required to meet safety approvals: Duracell® MN1604, PC1604, or Eveready® EN22, 522
† At 2.5 gpm (9.5 lpm), at 70ºF (21ºC), with 10-weight oil, and 1 gallon dispensed. May require calibration; out-of-box     
   accuracy is +/- 1.25 percent.

‡ At 2.5 gpm (9.5 lpm) at 70ºF (21ºC), with 10-weight oil, and 1 gallon dispensed. 

Nozzle (33) Kits - Graco SDP5 pre-set

 255459*  Automatic, non-drip, quick close nozzle  Qty Oil 
   •BODY, nozzle   1  
   •O-RING, packing  1  
   •SPRING, compression  1  
   •O-RING, packing  1   
   •STEM, nozzle, valve  1  
   •SEAT, valve  1  
 255460*  Automatic, non-drip, quick close nozzle    Anti-freeze
   •BODY, nozzle  1  
   •SPRING, compression  1  
   •O-RING, packing  1  
   •STEM, nozzle, valve  1  
   •O-RING, packing  1  
   •SEAT, valve  1  
 255461  Automatic, non-drip, high flow nozzle    Oil & Antifreeze
   •STEM, nozzle  1  
   •BODY, nozzle  1  
   •O-RING, packing  1  
   •O-RING, packing  1  
   •O-RING, packing  1  
 255470  Non-drip, quick- close nozzle    Gear Lube
   •Housing  1  
   •Body, nozzle  1  
   •O-RING, packing  1  
   •O-RING, packing  1  
   •Plug, Hollow, hex  1  

*Used for dispensing 5gpm (22.7 lpm) or less.


Web Hosting Companies